IEEE488 (HPIB/GPIB) - CABLES
Cablek's extra high quality IEEE 488 cables are designed for use in environments where a more rugged cable is needed to interconnect IEEE 488 (HPIB/GPIB) instruments and devices. The cables are made up with heavy duty double shielded cable giving it superior immunity to interference, both received and transmitted.
HPIB/GPIB cables are constructed with an EMI/RFI shield either side of the twisted pair signal cables. The connectors are die cast aluminium and will withstand a high degree of mechanical abuse as well as continuing the EMI/RFI shield right up to the connection point.
Features:
- Connecting computers and instruments.
- CN24 connectors allow daisy-chaining to another instrument or printing device.
- Up to 15 instruments (devices) can be connected to one computer (controller).
- Specified Transfer Rate: 1MByte per second.
- Data Transfer Mode: 8 bit parallel.
- Double-shielded and fully molded to reduce EMI/RFI interference and achieve maximum signal integrity.
- Connectors: Centonics 24 Male/Female to Centronics 24 Male/Female
- Lifetime Warranty.
|
|
HPIB/GPIB Bus Pin-Out Descriptions |
|
|
|
IEEE-488 / ANSI Connector PinOut |
|
|
|
|
|
|
| |
|
24-Pin HPIB/GPIB Bus PinOut [IEEE488 Pinout] |
| Pin # |
Signal Names |
Signal Description |
Pin # |
Signal Names |
Signal Description |
| 1 |
DIO1 |
Data Input/Output Bit 1 |
13 |
DIO5 |
Data Input/Output Bit 5 |
| 2 |
DIO2 |
Data Input/Output Bit 2 |
14 |
DIO6 |
Data Input/Output Bit 6 |
| 3 |
DIO3 |
Data Input/Output Bit 3 |
15 |
DIO7 |
Data Input/Output Bit 7 |
| 4 |
DIO4 |
Data Input/Output Bit 4 |
16 |
DIO8 |
Data Input/Output Bit 8 |
| 5 |
EIO |
End-Or-Identify |
17 |
REN |
Remote Enable |
| 6 |
DAV |
Data Valid |
18 |
Shield |
Ground (DAV) |
| 7 |
NRFD |
Not Ready For Data |
19 |
Shield |
Ground (NRFD) |
| 8 |
NDAC |
Not Data Accepted |
20 |
Shield |
Ground (NDAC) |
| 9 |
IFC |
Interface Clear |
21 |
Shield |
Ground (IFC) |
| 10 |
SRQ |
Service Request |
22 |
Shield |
Ground (SRQ) |
| 11 |
ATN |
Attention |
23 |
Shield |
Ground (ATN) |
| 12 |
Shield |
Chassis Ground |
24 |
Signal Gnd |
Signal Ground |
